As long as step 7 , you can restore the 6 faces of any cube

as long as the 7-step, 6-sided cube will be able to restore any
crack tips and share with you:
First, crack the puzzle, we must first understand its structure, 6-color 6-sided cube, each side is divided into the central block (the middle
block 6), corners (4 corner block 8) and the side blocks (four at the edge of the block 12). Of which only one side the central block,
their structure is fixed, so the center is a red block, then the red should be the other side to this focus. And the red in the
opposite the central block of the central block is always orange (international standard is so specified). The block has two side faces two colors, corners there
3 faces of three colors.

; ;

Next we will use the letters on behalf of each sides,
;

will then break sina in turn by the letter to explain to the 1 or 1 layer of noodles, and direction: for example: R (on behalf of the right clockwise
turned 90 degrees), R `(on behalf of the right turn 90 degrees counterclockwise), R2 (2 times on behalf of the right turn 90 degrees clockwise)

following is shown:


final note is: the name of each side is relative, for example, F is the front of the cube is the time for his own hand side, If the imitation
rotated to the other side, then there is a new side of a front.


Well, let's try the next step 7 to restore the cube it!

1. first side of the middle of the block is white (with a piece of rubiks logo) facing the top, and then make the white at the top ten
word, that is, all other colors of the blocks to the appropriate location (a small complex, see picture, note the subject of the above formulas Oh, did correct)


2. Then the white corners homing (Cheats said, very complex and easier to understand, or plug-Rights)


3. Then let the middle edge pieces into place.
the white face turned to the next, find the red and green side of the block, if the red and green on the top side of the block according top clockwise until the edge of the block
in Figure 1 on the same situation, in accordance with the formulas turn the cube, so that side of the block into place. If the red and green side of the block in the middle of a layer, but the location
errors or color errors, the first block on the right side of the red and green position in front, and then re-spin in accordance with one of the following sequence 1.



4. Then the top (should be yellow) side of the block to adjust upward, making yellow cross. If the rotation in accordance with formulas 1, the top-level
not a yellow cross, repeatable formulas by turning, until the yellow cross appears.


5. Then adjusted to cross the yellow around corners, a bit difficult to see formulas clue.



6. Usually this time yellow block, and the dislocation will have the color of the side, according to formulas (I have not fully digested) to the four corners of the
yellow block positioning.


7. Finally, the edge of the color and then adjust to the corresponding location. You're done! ! Thrill.